How to Securely Fit a Hard Cover on Your Pool

Installing a hard pool cover is an excellent way to protect your pool from debris, reduce evaporation, and improve safety. To ensure it’s both effective and long-lasting, it’s important to fit it securely. Here’s a step-by-step process:
1. Choose the Right Hard Cover
-
Measure your pool dimensions (length, width, and shape).
-
Select a cover specifically designed for your pool type—rectangular, kidney-shaped, or custom.
-
Make sure the cover material is strong, weather-resistant, and designed for safety.
2. Prepare the Pool Area
-
Clean the pool deck area to remove leaves, dirt, or obstacles.
-
Check for any sharp edges around the coping that could damage the cover.
3. Lay Out the Cover
-
Place the hard cover flat near the pool before installation.
-
Ensure it is oriented correctly to align with the pool’s edges.
4. Secure Anchoring Points
-
Track system: Some hard covers use tracks mounted along the pool edges. Ensure the cover slides into the track properly hard cover for above ground pool and locks into place.
-
Hinged covers: If your cover is hinged, align it with the pool edges and lock the hinge system into the ground anchors.
-
Manual locking covers: Place the cover over the pool and use anchors or locking pins to secure retractable pool covers it firmly into the deck.
5. Test the Fit
-
Once installed, check for gaps along the edges to prevent debris from slipping in.
-
Make sure the cover sits flush and evenly across the pool.
-
Test the locking system by applying light pressure to confirm it won’t shift.
6. Regular Maintenance
-
Inspect the anchoring points and locks periodically.
-
Clean the cover regularly to prevent buildup of dirt and algae.
-
Remove standing water after rainfall to avoid excess weight and stress on the cover.
✅ Pro Tip: If your pool is in a windy or storm-prone area, consider adding additional anchor points or straps for extra security.